1 kilowatt-hour of electricity to remove water 3.5-4.0 kg

1 kilowatt-hour of electricity to remove water 3.5-4.0 kg,cost 200-250 yuan/ton.The power consumption and the water removal rate are better than that of the same industry.

Strong drying capacity

Strong drying capacity, intelligent control of the water content of the mud, automatic and precise adjustment between 10-40%

Safe and easy to maintain

Fully automatic integrated design, safe and easy to maintain.Improve the economic benefits, but also achieve timely and accurate reflection.

Low temperature dehumidification technology

Low temperature dehumidification technology, humidity gradient, drainage and mass transfer, small air volume, less dust

Closed cycle system

Closed cycle system, zero emission, no odor, not affected by external climate

Anti-corrosion design

Professional anti-corrosion design, tailor-made, suitable for sludge reduction in different industries

  • 1度电除水 3.5-4.0 公升
  • 烘干能力强
  • 安全维护简便
  • 低温除湿技术
  • 闭式循环系统
  • 可量身定制

Choose us to solve the sludge problem

We can make the things easier

Jikang

Established the "Non-Newtonian Fluid Dehydration Research Center",We conduct in-depth research on the characteristics of sludge, the refined numerical simulation of the dehumidification system, the remote intelligent monitoring system and the application of results to create a "technical IP".

Comparison

The same type of industry is lack of relevant research centers, lack of research on the characteristics of different sludge, can not accurately carry out relevant simulation experiments. There is also a lack of in-depth research and application experience in intelligent monitoring.

Jikang

According to the actual situation of the site, tailor-made modeling schemes, and visually show the flow chart of the sludge treatment project for customers.Quick response,with the best project proposal within 24 hours

Comparison

The accuracy is low and cannot be completely dried and silt removed.

Jikang

A new generation of low temperature closed cycle sludge drying equipment with Independent air duct technologie ensure a Long using life time (10 years)

Comparison

The traditional heat pump drying technology adopts the method of surface evaporation, which requires a drying temperature of 70-80 ℃. Compared with our low-temperature closed-cycle sludge drying equipment, it costs more electricity and higher cost.

Jikang

Perfect combination of dehumidification system + energy recovery + closed cycle combination remove external influence

Comparison

The operation results of the equipment are easily affected by the weather and additional factors.

SMALL AND MEDIUM-SIZED SCROLL SLUDGE LOW-TEMPERATURE DRYING EQUIPMENT

SMALL AND MEDIUM-SIZED SCROLL SLUDGE LOW-TEMPERATURE DRYING EQUIPMENT

Through the joint action of high temperature heat source and dehumidification cold source, 40 ~ 60 ℃ extremely dry air is produced, which penetrates the sludge dynamic transmission network belt to evaporate the sludge moisture, creating a low-temperature and energy-saving drying environment; after absorbing water, the air returns to the dehumidification cold source and condenses low-temperature liquid water for discharge through the economic closed cycle.

  • High efficiency reduction

    High efficiency reduction

  • energy-saving design

    energy-saving design

  • Safe and harmless

    Safe and harmless

  • Economic saving

    Economic saving

  • Smart operation

    Smart operation

Parameters

LARGE SCROLL TYPE LOW TEMPERATURE SLUDGE DRYING EQUIPMENT

LARGE SCROLL TYPE LOW TEMPERATURE SLUDGE DRYING EQUIPMENT

The compressor adopts the scroll compressor of international famous brand for totally enclosed heat pump. The whole machine is of standard modular design with small floor area and flexible installation.

  • High efficiency reduction

    High efficiency reduction

  • energy-saving design

    energy-saving design

  • Safe and harmless

    Safe and harmless

  • Economic saving

    Economic saving

  • Smart operation

    Smart operation

Parameters

WASTE HEAT DRIVEN SLUDGE LOW-TEMPERATURE DRYING EQUIPMENT

WASTE HEAT DRIVEN SLUDGE LOW-TEMPERATURE DRYING EQUIPMENT

The low-temperature drying of waste heat sludge mainly uses the steam or high-temperature hot water generated by the existing waste heat as the high-temperature heat source, and the cooling water or sewage from the existing cooling tower as the dehumidification cold source.

  • High efficiency reduction

    High efficiency reduction

  • energy-saving design

    energy-saving design

  • Safe and harmless

    Safe and harmless

  • Economic saving

    Economic saving

  • Smart operation

    Smart operation

Parameters

VEHICLE-MOUNTED MOBILE SLUDGE LOW-TEMPERATURE DRYING EQUIPMENT

VEHICLE-MOUNTED MOBILE SLUDGE LOW-TEMPERATURE DRYING EQUIPMENT

Ready to use,Small footprint, only 22.8 square meters,Environmental protection, energy saving, high efficiency,special personnel training operation, easy to understand and operate,independent feeding system, movable front and back, up and down upgradeable

  • High efficiency reduction

    High efficiency reduction

  • energy-saving design

    energy-saving design

  • Professional training operation

    Professional training operation

  • Efficient

    Efficient

  • Smart operation

    Smart operation

Parameters

公司介绍

JIKANG

Environmental System Technology Co., Ltd

Guangdong Jikang Environmental System Technology Co., Ltd. was established in 2018 and is located in Foshan City, Guangdong Province.It is imported the USA advanced technology by Guangdong Siukonda Air Conditioning Co., Ltd. which is a Sino-foreign joint ventur with nearly 30 years of experience in the HVAC industry, and formed by senior environmental protection experts and Siukonda senior management team. It is a technology-driven service company integrating R&D, production, sales and after-sales service.It is committed to turning sludge waste into treasure, beautifying the living environment, and building an international well-known brand in the field of sludge reduction.MORE +

Use Widly

Our products are used here

  • Electroplating factory

    Electroplating factory

  • Government organs

    Government organs

  • Hospital

    Hospital

  • Public

    Public

  • Chemical industry

    Chemical industry

  • Automobile factory

    Automobile factory

  • Paper mill

    Paper mill

  • Sewage treatment plant

    Sewage treatment plant

  • Printing and dyeing factory

    Printing and dyeing factory

  • Enterprises

    Enterprises

  • Hotel

    Hotel

  • School

    School

Electroplating factory
Government organs
Hospital
Public
Chemical industry
Automobile factory
Paper mill
Sewage treatment plant
Printing and dyeing factory
Enterprises
Hotel
School
Partners

Partners

It is committed to turning sludge waste into treasure, beautifying the living environment, and building an international well-known brand in the field of sludge reduction.

Contact us

A big step in your cooperation on the phone.

  • Address
    Address:

    R&d Base: NO.1, Dongyang Third Road, Danzao Town, Nanhai District,Foshan city, Guangdong Province. Intelligent Factory:No.1 Yingjin Second Road, Danzao Town, Nanhai District, Foshan City, Guangdong Province

  • Phone
    Phone:

    (+86-0757)86600371 4008080920

  • Wechat
    Wechat:

    微信号二维码

  • Website
    Website:

    http://www.kaiyuntiyu.com

亿鸽在线客服系统